What is Electric Fence Charger and How to Use?

Cattles, cats, dogs and other domesticated animals need to be fenced. Nowadays, the most advanced fencing security for your animals is with the use of an electric fence. Like any other gadget, the electric fence needs to be recharged with the use of these electric fence chargers. It gives electrical power supply in order for this electric fence to activate. The power supply is very important especially in dealing with electricity. Without power supply, nothing will happen.

How to choose the best fence charger

There are many things that you should consider in choosing an electric fence charger. First, you should take into consideration the compatibility with your electric fence because if it’s not, it will not charge or it will create short circuit.

The brand of your electric fence must be the same as the brand of your charger just like phones. This is to make sure that it will recharge your fence. Second, try to study the specifications of your charger. If it says that you can only connect it with 110 or 210 voltages, please try to follow to avoid short circuit.

You must be aware of these things. Next, you should also consider the time on when it will be going to be fully charged. It should be monitored so your fence will not be overloaded with the electrical supply.

These are just some of the things that you should try to consider. Examples of these chargers are Dare Enforcers 80, Dare Enforcers 300, Dare Enforcers 600, etc. Each of these chargers depends on the fence. For example, Dare Enforces 80 uses only a stand-alone electric fence. Electric shocks that will be created to your cattle depend on the voltage drop.

With these electric fences, it is designed to make sure that the electric shock is not as powerful that can kill your animal. It is just a minor shock. There are things you should consider in replacing this charger. You have to disconnect it from the outlet before dealing with the fence.

Also, remove the ground wire to prevent you from the electric shock. You have to unscrew the nut in the wire from the mounting screw and then bend the wire and replace it. Afterward, you have to dismount the charger and check for the missing screws in the case and then install the charger. Lastly, connect the fences with the charger. When doing this, you have to be careful enough to avoid electrocution.

Electric fence charger enables you to recharge your fence that makes security with your animals. For now, there are many kinds of this charger but you should make sure that it is compatible with your electric fence.

Many of these are already available in the market. Prices of these chargers depend on the manufacturer. If you have an internet connection at home and you have a bank account, you can shop online and contact with the manufacturer. Just try to communicate with the manufacturer if you have a question to clarify. They have a lot of different fence charger for you to choose from, depending on what your needs are.

How to use electric fence charger

Electric fence is essential in keeping farm animals and livestock contained within a specific perimeter without the cost and labor of installing a permanent fence. Installing an electric fence charger is very simple and easy. Here are the things you’ll need namely pliers, high tensile wire, rods, steel, hot wire, 12-volt battery High voltage, and short pulse fence charger.

The first thing to do is to hang the fence charger on your corner post of the enclosed area. This post should be easy to access or closest to your power outlet. There are three types of fence chargers, namely: the AC plug-in, battery, and solar-power-operated types. Each of these types of fence chargers has its own benefits and they operate well as long as it is properly maintained.

The next step is to hammer a steel rod into the ground. Make sure this is near the fence charger. Just a tip, don’t use different types of metals because of results in poor contact and weakening shocking power. Cut 2-foot piece of wire and wrap 1 foot around the steel rod and attach the other end to the wire to the ground screw on the electric fence charger.

The third step is to cut a 2-foot piece of wire. Attach one end to the electric output screw on the electric fence charger. The other end of the wire must be attached to the electric fence wire to be charged by wrapping this around it several times. Wires should be kept at least 5-inch apart. For AC plug-in fence charger, the fence charger should be plugged into a standard 110V outlet. Hook the black clamp from the fence charger onto the negative post of the 12V battery for battery operated fence charger.

For solar power operated fence charger, let the charger sit on the sun for at least a day to have it charge build up. And the last would be turning on your fence charger. You will know that your fence charger is working properly if the fence charger meter arrow will be in the yellow to the green range which means the electric fencer is charged.

Mistakes cannot be avoided while installing your electric fence charger, so here are things that you should avoid. One is the poor earth grounding. Poor grounding results to weak shocks so electricity must complete a full circle back to the charger through the ground.

Fence posts and wires should also not be too close together. You should also keep an eye on bottom wires in contact with heavy and wet vegetation. The wet grass will suck lots of juice of any fence charger. Hook the lower wires separate from the other wires and install a switch for lower wires.

Your electric fence charger should have low impedance, have a warranty and replaceable components and come from a dependable supplier. Be sure to purchase one that puts up lots of power. What are you waiting for, have your own now and install it on your farm.

Leave a Reply